logo-croped

Download Blackra1n RC3 to Jailbreak & Unlock iPhone 3G/3GS 3.1.2

Blacksn0w

As we had posted some days back about Blacksn0w first ever tool to unlock iPhone OS 3.1.2 with baseband 05.11.07 is ready now and all set to release. Geohot has confirmed that its successfully working on iPhone OS 3.1.2.

Blacksn0w will be available via Blackra1n RC3, in order to unlock iPhone 3G/3Gs 3.1.2 you need to first upgrade to firmware 3.1.2 and then download Blackra1n for windows/mac and click on make it ra1n. once your iPhone reboots you will see “blackra1n” app click on it You will see “sn0w”. Install this, and enjoy your unlocked iPhone.

Features of Blackra1n RC3

1. Hacktivation support,

2. 15 second speed improvement,

3. Tiger+PPC support,

4. and installation of the latest blackra1n.app

Download Blackra1n RC3 to Jailbreak & Unlock iPhone 3.1.2.

RELATED:  How To Block A Number On iPhone

Category

tags

Share this post

60 thoughts on “Download Blackra1n RC3 to Jailbreak & Unlock iPhone 3G/3GS 3.1.2”

  1. I’m really thanks for Geohot has release Blacksn0w that its successfully working on iPhone OS 3.1.2.
    I was success with my iphone 3G and look good for me.

    Thanks again!

  2. What do I do if my iPod was almost done and then it just went all wild and the screen was red and blue

  3. Delighted the unlock is finaly released, but my Wi-Fi doesnt work now as soon as i unlocked it. Any ideas???

  4. hi how are you and can i do that on my phone because my phone is jealbroked? please tell me how to unlock my iphone?

  5. AJ and others with WI FI problems

    Those of you who are having issues with WiFi after jailbreaking and unlocking with blackra1n RC3 (with blacksn0w) should reset network settings by navigating to Settings –> General –> Reset –> Reset Network Settings and then reboot the iPhone.

  6. after the jailbreak i can’t reboot my iphone 3gs. if i reboot it i must connet with itune.my wifi don’t works!?
    thx

  7. Tom P.

    If you have a 3G I am sure you can. Just restore to 3.1.2 and use blackra1n to re-jailbreak and then unlock it when it’s installed in your new jailbroken phone.

    I have jailbroked and unlocked 3 in the last few days including 2 that were already jailbroken and unlocked with older Operating Systems.

  8. i have buy a new one 3gs with the firmware 3.1.2.after the jailbreak with blackra1 i have problem with the reboot.if i reboot mi iphone i have the symbol for connecting with itunes. i need help!?

  9. GARGI

    you are supposed to be connected with iTunes, then after reboot you will have blackra1n inside your phone. use that to unlock.

  10. hi i’ve problems with my 3gs after ran blackra1n, i cannot restart my iphone, if restarted, it became in dfu mode, (itunes cable screen) and then i’ve to run blackra1n again… a read about a new kind of baseband lock in OTB 3.1.2 iphones… somebody know about it? tks

  11. hi i have same problem , my ip 3gs 3.1.2 , after run blackrain . my ip no wifi try reset net work then if i restar my iphone it became DFU mode ,then i had to restore the phone agian , pls help me out any one know about it

  12. i have doing jailbreak on 3gs FU with blackra1n. which production week is 46. (see the serial no. xxxx46xxxxxxxxx )
    until here cannot resolve the problem after restart still in dfu ( itunes n cable )

  13. If your ipt2/3GS/ipt3 is rebooting into recovery after running blackra1n, this isn’t a bug. It’s a feature. You need to run blackra1n every time to boot it. This ‘feature’, called tethered jailbreak, is enabled by upgrades Apple made to the bootrom and the fact ipt3 uses nand flash. …..say geohot
    Solved

  14. can’t reboot after jailbreak.

    If I have to use blackra1n o reboot my phone every time then thats stupid, if I have to reboot my iphone away from my laptop how on earth am I going to use my phone, this is nuts

  15. Guys i have the same problem after jailbreaking my 3gs iphone.When i reboot i instantly go into DFU mode.I am using the first version of blackra1n cause my phone is already unlocked.What do i do?Thanks.

  16. I have the same problem with everyone that talked about rebooting the 3gs.i cnnot do it away from my laptop cause i go into recovery straight away.There has to be a solution!if my battery dies on me i have the same problem.please advice!thanks!

  17. Works like a charm.. Awsome stuff!!! I dont see any problem with this at all. I’ve unlocked a iphone 3gs 3.1.2 with 5.11.17 baseband.

  18. For the iphone 3G S when you unlocked the phone you must keep the battery full at all time cuz if the phone is out of battery it will ask you to plug in with itunes. Don’t worry just ignore that screen. All you need to do is plug the phone in and open Blackra1n it will reboot the iphone for you. Apple recently had changed the bootrom on all new iphones and right now the only way reboot the iphone is to connect it with Blackra1n. During the reboot make sure itunes is closed.

  19. hello guys. i also same problem. after jailbreak i need to plug when i everytime reboot. After reboot also my wifi can’t use.
    I need to use purplera1n for 3GS or some solution

  20. Hi All,

    After unlocking my iPhone 3gs with Blackra1n, the ONLY problem I have is that I have to reset network settings and then reboot my iPhone DAILY, in order to get a wifi connection.
    Is this a problem with you guys after unlocking with Blackra1n ?
    From what I’ve read, some indicate its just a one time reset.

    John

  21. IF YOU ALREADY HAVE 3.1.2 AND 5.1 MODEM FILE, YOUR SCREWED AS THE CARRIER MODEM FILE IS BLOCKING BLACKRAIN UPON REBOOT OF CYDIA OR ROCK APP INSTALL, YOU CAN JUST NOT DO RAIN OR CYDIA AND YOU WILL BE BROKENM, BUT FIRST TIME YOU POWER CYCLE THE PHONE YOUR JACKED UP AND WILL NEED TO HOOK UP TO ITUNES AND RESTORE YOUR PHONE TO ORIGINAL…

  22. Hi I have 3g with 3.1 installed I tried with ultra snow it’s only shoeing searching network I tried with black rain it’s rebooting but the rain symbol not appearing kindly help to unlock

  23. after using ultrasn0w to unlock my iphone 3gs 3.1.2 it says ’searching…” at the top left corner. then goes to “no service.” how do i make it work? please help!!!

  24. wellllllll done. ipt 64g 3g after the fist time it reboot and ask to connect to itune i rerun black rain a second time and re-jailbrak and it work.

    now i have to find how to put apls i have on my imac.

  25. I too am having the same problem, after jailbreak with blackra1n my 3Gs iphone it goes to Dfu mode. Please help.

  26. I’ve been jailbreaking iphones for some time now. Many in fact. Recently someone brought me their new purchase of 3gs on January 15th 2010. It was a bugger to jailbreak. I had to repeat over and over and of course, ran into the reboot problem everyone is having. BUT I had another problem that seemed odd. I had a wifi connection, but no phone connection. I rejailbroke though I didn’t do a restore(I had gotten this phone tweaked to perfection).I did the network resets, etc. Nothing fixed it. It’s not uncommon to have to run blackra1n a number of times to get it there. BUT no phone signal but wifi signal. Search internet. FINALLY came across blackweather, ran it, and whala! Signal.
    But don’t let it reboot till Geohot comes out with something.
    Thanks George!
    Beverly

  27. For those with rebooting problems.I got this answer from another blog.This means you got one of the very latest iPhone/iTouch from Apple with iBoot version 359.3. Somwhere in October, Apple started shipping iPhones with this new version.

    Because of the new bootloader blackra1n can only applies a tethered jailbreak to your device meaning every time you restart of shutdown it will go into recovery mode and
    blackra1n must be ran again to get it past the Apple logo boot screen.

    Your phone will not lose its jailbreak, and all customizations will be preserved, but the phone will not be able to boot past the Apple logo screen on its own.i hope this helped!so,basically we have to wait for a solution!

  28. FOR THEM PEOPLE WITH DFU SHOWING YOU NEED TO PLUG TO ITUNES.. JUST MAKE SURE YOU CLOSE BLAKRA1N THAT U RAN AND THEN RE-OPEN IT AND MAKE IT RAIN AGAIN! THAT WORKED FOR ME

  29. hey everyone with 3GS iPhone I have one too and to keep blackrain on my phone, when I reboot I keep phone plugged into my pc with blackrain still open and that keeps me restoring my phone… drerandom on utube showed me how check it out? I hope it helps and works peace out :)

  30. I unlocked iphone 3GS with blackra1n but the problem is that GPS is not working and it couldn’t find my location, Can any body help me??

  31. i have tried blackra1n to unlock my 3gs os 3.1.2 and everything works well… except the iphone cannot make a call.
    everytime i made a call it directly shows ‘call failed’
    but i can still receive call n send/receive sms…
    pls help

  32. try reseting your network settings ,settings-general-network-cellular data ,at the bottom reset network settings rember the apn mmscjust copy them reset the phone and paste over them turn off phone turn it on there you go

  33. i wnt to jailbreak my ihpone bt i got the 3.1.3 with 5.12.01 bt i cnt do it . i wud lik to no if it will have an effeact on my iphone aswell fanx

  34. Those guys who made this jailbreak should start to do something, if they are making something like this than they should test it properly not give it to us when it’s still raw, they made my phone useless

  35. Hi…

    I am facing the same problem and this is actually a big issue for me.. i am using a 3GS with farmware: 3.1.2. and if i reboot the phone it is asking to plugin with itune! come on! is there anything to avoid that?? i am using my official sim to this phone and if i mean only if by somehow the phone restarts !!! man,,, i am dead! confirm! please suggest something positive…

    Regards

    wishes..

  36. aye when is their gonna be a jail break 4 i pod touch 3.1.3 cuz i tried every thing nothing work

  37. Guraspashvili97

    my iphone can not download anything pls heip me and say me how to download things in my iphone 3g

Leave a Comment

Your email address will not be published. Required fields are marked *