How to Jailbreak iPhone 3G/3GS 3.1.2 Using PwnageTool 3.1.4 On Mac
ADVERTISEMENTS
Finally iPhone Dev team released PwnageTool 3.1.4 for Mac OS Users to jailbreak iPhone 2G/3G/3GS 3.1.2 & iPod Touch 1G/2G 3.1.2. Windows users shout download custom firmware for OS 3.1.2 as PwnageTool 3.1.4 for Windows will not be available.
As usual we are here with complete guide on how to jailbreak iPhone 3G/3GS 3.1.2 using PwnageTool 3.1.4 and Unlock with Ultrasn0w. please note if you have already upgraded to Firmware 3.1.2 then you are out of luck for unlock.
How to Jailbreak iPhone 3G/3GS 3.1.2
1. Firmware downloaded in Tools sections save it on your Computer (Preferably create a folder pwnage and save in that folder this is for simplicity)
2. Download PwnageTool 3.1.4 and save it in pwnage folder.
3. Keep your iPhone connected to your computer.
4. Double click PwnageTool 3.1.4 to mount it and create shortcut of PwnageTool in pwnage folder.
5. Now Launch PwnageTool and click ok on warring message “PwnageTool is a free tool”
6. Select Expert Mode from Top left menu.
7. Now select Device i.e iPod Touch, iPhone and click on Blue arrow icon to continue.
8. PwnageTool will auto detect your Firmware 3.1.2 IPWS file downloaded in step 1, if not then click browse and select proper file.
9. Select the apps you want to install from given menu, at least cydia installer and click on build to start custom firmware building process.
10. Now select location to save custom IPWS file created by PwnageTool.
11. PwnageTool 3.1.4 may take 10-15 min to complete Custom iPhone 3GS 3.1.2 IPSW file creation.
12. Enter Admin password.
13. PwnageTool 3.1.2 will display a prompt “has your iPhone 3G been pwned before?” If you are unsure, click no.
14. Turnoff your iPhone as per directions keep it connected.
15. Now launch iTunes and restore your iPhone with your custom firmware bundle by holding the “Alt/Option” button and clicking “restore”.
16. Browse and Select the custom IPSW file you created (iPhone2,1_3.1_7D11_Custom_Restore.ipsw) and click “open”.
17. iTunes 9 will restore your iPhone, Process may take 10-15 minutes.
18. Your iPhone 3GS 3.1 will reboot automatically
21. That’s it, if you have followed above steps properly then you will have your iPhone 3GS OS 3.1.2 jailbreaked.
Reader Comments
I cannot find my answer on google, hopefully someone here would be able to answer me,
I’m a windows user (don’t own a mac) and I want to keep my 3g 3.0 (ultrasn0w) and be able to update to 3.1.2. is it possible to update my iPhone to a custom firmware made on a mac and then restore on itunes that of windows?
thanks.
My 2G iPhone was running the 3.1.2 firmware and could be updated through iTunes without the need to re-jailbreak to avoid activation. (I have no idea how but wasn’t complaining!) I decided a wanted to sell the phone so I restored to factory setting and it locked the phone. After following these instructions I was able to successfully jailbreak it and alas AT&T can stick it up their arse. Cheers for the post guys.
P.S. When it came to building the custom restore i didn’t have to alter any of the settings on PwnageTool, I simply clicked build.
I have upgraded my iPhone to os 3.1.2 with a baseline 5.11 how do I unlock
and jailbreak this phone so I can use tethering and be able to use Cydia software? Please help. I am somewhat confused because the sites that I have gone to say I am out of luck because of the baseline that I have. Can. Anybody help me, unlock,jailbreak, and enable tehering for my iPhone.
I have a iPhone 3g with firmware 3.1.2 and a baseline of 5.11. I run windows vista on my computer. I need to jailbreak, unlock and enable tethering on this iPhone 3g. Please help every site tells me I am out of luck because my baseline is 5.11. I want to be able to use tehering and I would like to be able to get free software through cydia. I was able to use my phone for tethering when I had firmware 3.0 on it however I upgraded the phone to the new firmware 3.1.2.. I know someone out here is smart enough to help me. Any input on how to achieve this goal would help me our. Thanks Ken
@ Ken
go to blackra1n.com
and also check iphonejtag.blogspot.com
easiest unlock ever
Can someone help me, that I have iphone 3GS, with firmware 3.1.2 & modem base band 05.11.07. But when I try to jailbreak or unlock, it takes my phone to recovery mode, than screen goes blank (on picture shows on the iphone), on the other hand the message appears on the computer “the phone will jailbreak once reboot”, but does not reboot itself, than i reboot manually and it start like normal phone (does not jail break or unlock). Does someone know why & how to solve the issue.
helo .. i jailbreak my iphone 3gs. at 1st it was ok. but when i turn off my phone. it Was on usb mode. i have to restore back . pls help me
thanks…
I have a 3gs 16gb 3.1.2 i used blackra1n and it works but everytime i reboot or turn off i have to usa blackra1n again i bought a brand new same thing what do i have to do? everytime i reboot or turn off and back on it shows on the screen the cable w the itunes icon.. Please help
hey!!!!!!!can somebody help me to jailbreak my iphone 3gs,,,,,,,have been trying to do it……does anyone knows how to do that,,,,,please help me out
Who can help me, I’ve got iPhone 3GS and 3.1.2 firmware, I’ve unlocked but every time I restart iPhone, on screen appears a logo to connect with iTune, pleae help me out…