Download Yellowsn0w to Unlock iPhone 3G Firmware 2.2 Baseband 02.28.0
ADVERTISEMENTS
iPhone Dev-team had announced about Project “Yellowsn0w” iPhone 3G soft Unlock tool and also posted Demo video of Yellowsn0w. As per promise by dev-team Yellowsn0w is now available for download on this New Year’s Eve (a bit late).
Yellowsn0wis the world’s first software unlock for the iPhone 3G. With yellowsn0w you can unlock your iPhone 3G firmware 2.2 and use it with any other carriers apart from AT&T. iPhone dev-team had warned to all iPhone users planning to jailbreak iPhone 3G firmware 2.2 not to upgrade to baseband 02.28.0 as Yellowsn0w will only work with iPhone 3G Firmware 2.2 with baseband 2.11.07.
But now you can safely ignore that warning as Dev-Team has managed to get yellowsn0w to work with iPhone 3G baseband 02.28.0, So no need to worry if you have already upgraded your iPhone 3G 2.2 with baseband 02.28
Recent updated message on this post, it’s clear that the soft unlock (yellowsn0w) will now be only for baseband 02.28.0 (the most recent baseband). Hence you need to upgrade and jailbreak your iPhone 3G with firmware 2.2 baseband 02.28.0 to use yellowsn0w.
How to Upgrade to iPhone 3G Firmware 2.2 with baseband 02.28.0
1. Download iPhone 3g Firmware 2.2
2. Jailbreak iPhone 3G Firmware 2.2 Using QuickPWN 2.2 and add Cydia/Installer.
Quick Points About Yellowsn0w iPhone 3G Unlock soft Tool
- This unlock software works with the latest baseband only so jailbreak using QuickPWN or PwnageTool and upgrade to the latest version which is 02.28 BB.
- This application is launched on boot whenever there is a baseband reset and it’s small and unobtrusive.
- This application is a non-commercial application so it cannot be used by third-party companies or resold by anyone.
Download Yellosn0w to unlock iPhone 3G with baseband 02.28.0 from cydia/Installer Link
Cydia Repos:
http://apt9.yellowsn0w.com/
Installer sources:
http://i.yellowsn0w.com/
Please Note: The DevTeam says that once you are done installing yellowsn0w through Cydia go back to the main menu on Cydia and restart your iPhone with the 3rd party SIM installed. Wait for the slide to unlock screen, and then wait 10-15 seconds. If you don’t see your carrier name pop up you must remove your SIM, insert it again, and wait 10 seconds. (The DevTeam plans on elimintating this step)
You may check out Yellowsn0w iPhone 3G unlock video demo
Reader Comments
hey i was wondering i did everything it said and i still cant find yellosnow on the cydia
thanks thanks thanks you are the BEST.
I did not get any signal, it don’t even search for carrier network and just have …….
Was using 0.9.4 previously before i turn off my phone and it works fine. After i turn back on my phone and its not working anymore. So, i updated to 0.9.5 and its not working now.
when i try to unlock iphone 3g 2.2 through quickpwn system is not reading my iphone IPSW….can any one suggest the reason
can i use it to unlock 2.1 iphone. i am afraid that i can not unlock it after i have update to 2.2.
thanks
please help i can not find yellowsnow
just got it working and i’m back in love with my iphone
very very good. ot wprked. tnx a lot for that. is great. my iphone finally works.
What is ipsw some 1 tell me contact me @ dbanks@yahoo.com
IPhone 3G 2.2 Froze whilst it was being Pwn with QuickPwn 2.2?
During Pwning process error message on itunes popped up ( http://s548.photobucket.com/albums/ii343... ) which did not stop Pwning process but after Pwning was done installing it’s components, when it came time to boot it did but it froze on the Pinneapple screen. It has been like that for several hours. Anyone experienced anything familiar? Any chances to bringing the iPhone back to life?
Obs. I have tried over and over again all the resets (hard and soft) and nothing seems to work, it flashes every now and then and iPhoto pops up and QuickPwn tries to pick it up as well but only to find out after the whole press this hold that scheme that it doesn’t work and it is still varying from frozen pineapple to phone being off!
HEEEEEEEEEEEEEEEELP!
Thank you for yout attention!
yes. w mine happened the same story few days ago. what I did was to jailbreak it again usung Pwning. if that does not solve your problem, try iliberty first, then Pwning. hope it will work for u as well. good luck
I just got another white 3g iphone yellowsnow working good
now on tmoble
thanks devteam……
Has anyone tried the yellowsn0w software? I run it last night on my iPhone 3G, firmware 2.2 and it unlocked it, but it wont pick up any signal, i’m trying to use it on TMobile.. any ideas anyone?
Thank you so much!!!! IT worked! 1-21-09
it unloked the iphone but I don’t get any 3G/GPRS siglnal.
when I try to add the yellowsnOw nsource to sources I get this error message.
Did Not Find Repository
The indicated repository could not be found. This could be because you are trying to add a legacy Installer repository (these are not supported).
[i] have tried many times .Any Ideas why I cant add this source. Installer wont allow that link also.
Thanx
hey can the yellowsn0w work on 2g ipod touch and dont be a dumbass telling me thaat i should know that… ok im mostly up to date but i cant find the answer to this.lol
i did every thing but still nothing ?what to do?
How to change baseband 02.30.03 to 02.28.0 ? because yellosn0w did not work for BB 02.30.03… i need help please.. thanks.
Same here, updated to 2.2.1, new baseband 2.30 is a problem. How to downgrade baseband? or when is the new yellowsn0w coming out for the new 2.30 baseband. Please help. Thanks.
I had to see why unlocked iPhone 3G 2.2, baseband 02.28.0 doesn’t work with M-tel in Bulgaria but works with both operators in Kuwait. When I disable the PIN request from the SIM card, after restart, the phone works with no problems. I changed another SIM – same result – no PIN, iPhone works, PIN on, iPhone doesn’t see provider. If I change the SIM without restart result is no carrier, only ___. So the SIM should be with PIN disabled, then phone switched off and after that on. Option from “Settings”, “Phone”, “SIM PIN” is not available when PIN is ON. You need another phone to change that on the SIM, as it is SIM property not the iPhone one.
MY BASE BAND changed to 30.03 ?? but its not 28.02
what can i do?
OGY you rule, govern about SIM PIN and i certain that it is necessary to take into account the operator since from your local “Life” and “Kyivstar” works only “Life”, but “Kyivstar” not more three days. Please sorry for my english, because i am from Ukraine.
How to change baseband 02.30.03 to 02.28.0
or
When Yellowsn0w will be available for baseband 02.30.03
any ideas ?
How to change baseband 02.30.03 to 02.28.0 thanks
dosnt work whit gevey sim
When Yellowsn0w will be available for baseband 02.30.03 or any one know how to downgrade the baseband?
Need help with my phone
hello “Download Yellowsn0w 0.9.8 to Unlock iPhone 3G 2.2.1 ” you posted on february 7th that yellosn0w 0.9.8 is about to be released… and we are already in march 7th…
Is it released or not yet…
and how soon will it be released ?
Please help.. i have a 3g with firmware 2.2.1 and baseband 02.30.03 and i can’t use it… always show: no signal…(i dont use a turbo sim or anything)
Please if there is any solution tell me
thank you
The download link of cydia installer does not work.
please help
is there any way to unlock iPhone 3G 2.2.1 with modem firmware 03.30.03???
How to change baseband 02.30.03 to 02.28.0 thanks
rebel sim work good for BB 2.30.03 that’s it , no one can change baseband
have realdy unlock for iphone3g or no because i need unlock my iphone you know ???????………….
Hello;
Is there a program to unlock iPhone 3G 2.2.1 BB 2.30.03??
Excellent guide, worked perfectly!
For FW 2.2.1 with baseband 2.30.03 cannot be unlocked by yellowsn0w or any other tool currently.
Or you have FW 2.2 but with baseband 2.30.03 also cannot be unlocked. Why ? Because you have the baseband 2.30.03 and it cannot be changed.
So for those with baseband 2.30.03, just wait for the dev to have a solution that can unlock your iphone and there is no need to spam or keep asking “when ? how ?” there is NO use for those questions. Have fun waiting for your unlocked solution.
P/S : If you cannot wait, just SELL off your current Iphone and buy a new UNLOCKED Iphone. Then next time, you won’t need to ask so many questions.
how to get rebel sim heeeeeeeeeeeeelp
If you want a rebel sim card just go to http://www.RebelSimCard.com
Unfortunately piggyback simcards are not a good solution, you keep loosing connection and the iPhone constantly refuses the sim card…
If you were thinking to buy an iPhone and then unlock it please do not do it, Dev-Team is working on the future firmware and respective baseband but no one really knows if they will be successful. From now until June/ July Dev-Team will not release any unlock, they are afraid that apple will close the unlock with a baseband release.
And again piggyback simcards are a really bad option, they do not work very well and they can break your simcard slot… You were warned!!!
i accidently downloaded the new firmware 2.2.1 and it locked it and made me go through all this stuff that took forever in the end i unlocked it butthe jailbreak whent of i want to put on 2.2 firmware but i’m scared will it lock? and if it does what do i do help me please
hEEEEElp Me PLEASE I BEG U.
i accidently downloaded the new firmware 2.2.1 and it locked it and made me go through all this stuff that took forever in the end i unlocked it but the jailbreak whent of i want to put on 2.2 firmware so i cn jailbreak it but i’m scared, will it lock? and if it does what do i do? help me please.
HEEELP ME PLEASE PLEASE
Don’t eat the yellow snow!
use bootloader downgrade bb 2.03.03 to 2.28.0 and unlock it easies guys
i also used bootloader to downgrade my firmware 2.2.1 baseband from 2.30.03 to 2.28.0
installed yellowsn0w, rebooted my iphone with my new sim card but it came up a message that said that “different sim detected, please connect to itnes”, then i connected my iphone and it said that the sim card was invalid for this phone
i want to know how to really unlock my iphone 3g, baseband 2.28.0 and firmware 2.2.1
my carrier is claro (guatemala), and i want to use my tigo/comcel sim on my iphone
thanks a lot
there a program to unlock iPhone 3G 2.2.1 BB 2.30.03
use this fix worked great :) and very easy to do :)
3g-fuzzyband-downgrader
http://www.iphonehacks.com/2009/05/3g-fuzzyband-downgrader-gui-based-tool-makes-it-easy-to-downgrade-baseband-from-023003-to-022800-for.html
i have yellowsnow 0.9.8 with 2.2 firmware but is giving me invalid sim when i try to insert my new sim. any suggetions anybody…
I get the same, my phone is from Movistar of spain, and it gives just for a short blink, invalid Sim, and it doesn’t find any network.
I’ve got baseband 2.28.0 and fw2.2 and I just don’t get it…
Finlay there is solution …
http://www.iclarified.com/entry/index.php?enid=649
i need help on how to unlock iphone 3g,2g&3gs without having any problem pls with the jailbreaking plus how to download the required firewares for iphones
I believe you can find everithing you need here
http://www.iclarified.com/entry/index.php?enid=2311